Мостовые краны 10 т

Made 2 bridge cranes for the plant for the production of elevator equipment

In November this year, one of the Ukrainian factories specializing in the production of elevator equipment ordered 2 bridge cranes at our enterprise, which are necessary to increase their production capacities. In particular, cranes were needed to service the new line, where various elevator equipment was assembled.

? The ordered crane equipment was designed, manufactured and installed as soon as possible.

Technical characteristics of the manufactured cranes:

  • carrying capacity – 10.0 t;
  • lifting height – 7.0 m;
  • crane span – 13.5 m;
  • lifting and lowering speed – 4.0 m / min;
  • speed of movement of the cart – 20 m / min;
  • crane movement speed – 40.0 / 10.0 m / min;
  • group operating mode according to ISO or GOST – 2m (medium);
  • degree of protection of electrical equipment – IP55.

Complete set of delivered crane equipment:

  • wire rope type MT, gear motors for moving and lifting, end beams – manufactured by Podem (Bulgaria);
  • span bridge – a welded beam of a box-shaped structure with a width of the riding shelf 295 mm;
  • current supply to the crane – closed trolleys;
  • radio control system;
  • pendant control panel;
  • load limiter;
  • limit switch of raising and lowering;
  • limit switch of movement of the crane;
  • trailer switch of movement of a waist;
  • thermal protection of the lift engine;
  • phase control relay;
  • main contactor in the circuit;
  • light and sound alarm for crane operation – CN 380V.

The installation of overhead bridge cranes was carried out in the conditions of the existing production. After their installation, commissioning was carried out, then – static and dynamic tests of cranes. At the final stage, the representatives of the Customer were given a full package of technical documentation. Both cranes are currently operating successfully in the new workshop.

(2 оценок, среднее: 5.00 из 5)
Loading...
Отправить