таль канатная Podem

Supply of 24 electric hoists to the leading cement producer in Ukraine

Our company has supplied 24 Podem electric wire rope hoists of various capacities (from 1.0 to 40.0 tons) to one of the leading cement manufacturers in Ukraine.
In the course of negotiations with the Customer, a detailed technical task was drawn up for each hoist. Depending on the tasks performed, operating conditions, overall dimensions of the servicing sites and types of monorail, rope hoists with normal (telpher with normal construction height) or with a reduced construction height (telpher with reduced construction height) were selected. At the same time, for each of them, optimal lifting and moving speeds, as well as the necessary safety devices, were selected.

For example, the largest hoist hoists had the following specifications:

Electric rope hoist monorail (mobile):

  • lifting capacity - 40.0 tons;
  • lifting height - 12.0 meters;
  • execution - general industrial, with a normal construction height;
  • ISO mode - 1 Am (light);
  • monorail track with a turning radius - 4.5 meters, rolling shelf width - 150 ... 200 mm;
  • current power supply - cable;
  • lifting speed - 4.0 / 1.0 m / min;
  • travel speed - 20.0 / 6.0 m / min;
  • polyspast - 4/1;
  • control - 4-button remote control;
  • ambient temperature -20 ... +40 °C;
  • safety devices - limit switch of the lifting / lowering mechanism, thermal protection of electric motors, emergency stop and key-mark on the ulte management.

Electric rope hoist monorail (mobile):

  • lifting capacity - 32.0 tons;
  • lifting height - 8.0 meters;
  • execution - general industrial, with a normal construction height;
  • ISO mode - 1 Am (light);
  • monorail track with a ski shelf width - 150 ... 200 mm;
  • current supply power - cable;
  • lifting speed - 2.0 / 0.5 m / min;
  • traveling speed - 20.0 / 6.0 m / min;
  • polyspast - 4/1;
  • control - 4-button remote control;
  • operating environment temperature -20 ... + 40 °С;
  • safety devices - limit switch of the lifting / lowering mechanism, thermal protection of electric motors, emergency stop and key-mark on the control panel.

All delivered electric hoists will be used for installation and subsequent maintenance of various components and mechanisms (electric motors, gearboxes, moving parts) of a unique new cement production line. The launch of the new line will allow the enterprise to produce an additional over 1.5 million tons of cement per year.