Enterprise «Kyiv Crane Machinery Plant LLC» 'next project for the production and installation of overhead bridge crane lifting capacity of 10t electric reference was completed (crane bridge abutment g/n 10t span 23,0m) and runway to him for a new dairy farm in Zhytomyr region.
Single-girder overhead crane lifting capacity 10t span 23,0m
According to the process of production and technical department of the Customer, was tasked to design, produce and install crane 10,0t for lifting, moving and agricultural equipment maintenance.
Customer approved version of the crane motors with frequency variable speed drives. Installation radio frequency inverters and allowed to avoid swinging and damage when starting or expensive recovery equipment, as well as to carry out the movement of the crane independent of the operator, as will be serviced in the workshop machine overall. Taking into account the wishes of the customer, the design of the crane, it was decided the top fastening of a flying crane beams to end girders, which expanded the range of lifting, without the use of a reduced construction height equipment, and as a consequence, does not entail an increase in the project cost.
By crane manufacture and installation of completion of the reference single-girder electric specialists of "Kiev factory of PTO" leveling paths crane was produced, the routine tests with a load on the static and dynamic loads, issued a technical report on the crane installation work, as well as passport and the approvals to enter into operation in gospromtehnadzora bodies.
The main parameters of the bridge crane reference:
- Single-girder bridge crane supporting KMO-10,0-23,0-10,0-A5
- 10,0t load;
- crane span 23,0m;
- limiter crane load capacity;
- flight path bar box structure;
- lifting height H = 10,0m;
- 0 ... lifting speed of 4 m / min; (Mitsubishi electric company inverter)
- Speed hoists 0 ... 20.0 m / min; (Mitsubishi electric company inverter)
- the speed of movement of the crane 0 ... 30.0 / 10.0 m / min; (Mitsubishi electric company inverter)
- burton 4/1 hoists;
- crane control - radio control / remote backup cable;
- runway - square profile 50mm, L = 48m;
- current supply to the hoist - type Festoon (cable trolleys with hard galvanized profiles);
- current supply to the faucet - type Festoon (cable trolleys with hard galvanized profiles);
- electric hoist type MT525 10 H10 V4 4/1 SN 53 20 (pr-va Podem plant, Bulgaria);
- bearing end carriages G1250-3650 (Podem, Bulgaria);
- mode group - the A5 (middle);